ACO CDNP6ACC, Инструкция пользователя

Страница: 31 / 68

31
When the doorman receives a call, they can call a specific apartment using
doorman’s unit. Upon answering the call, the doorman can press the "KEY" button
and hang up the handset, thus forwarding the calls. Making this connection is
possible only if
bit4 i
n P17 is enabled in doorman’s panel.
Doorman functions can be used in residential estates with access control, etc.
XII. UNIT PROGRAMMING
It is possible to change multiple operating parameters of the unit (individual
opening codes and programs to facilitate installation and repair of the system)
using the software.
The parameters can be modified with the installation programs. Access to the
programs is protected by installer’s password. All settings of the unit are saved in
permanent memory and are not lost when the power is turned off.
For systems with multiple units, modifications to the settings apply only to the unit
in which they were made. To transfer settings to other units, use the CDNP
computer program.
It is possible to read all settings of the unit, modify them and archive them
using a PC (via the CDN-USB cable) and free CDNP software
(
www.aco.com.pl ).
In order to enter the installation programs, press the " key " button and enter the
eight-digit password (1507xxxx) -
this operation is confirmed by a modulated “up”
sound signal, the software version number appearing momentarily on the display,
followed by the "
PROGR " message. The first four digits of the password (1507)
are a fixed digits and the following digits ("xxxx") are the four-
digit installer’s
password. The time limit to enter the password is 5 seconds. " Otwie " [open]
appears a moment later as a base program.