Ace ACE-3105, Инструкция по установке и эксплуатации

Страница: 91 / 418

ACE-3105, ACE-3205 Ver. 5.2 Configuration Sequence 4-1
Chapter 4
Configuration
This chapter explains in detail the different configuration options available for
ACE-3105, ACE-3205.
4.1 Configuration Sequence
Manual Configuration
The initial configuration of ACE-3105, ACE-3205 consists of three main
configuration stages (assuming there are no ready-made configuration files for
download):
1. Configuring for Management (see
Section 4.2
) – Setting initial system
parameters that are required for enabling remote/local management access
to the unit. This includes:
ƒ Configuring the terminal control
ƒ Entering device information, router parameters, authorized managers,
and management access definitions
ƒ Setting the date and time – to allow accurate logging of system events
ƒ Configuring the system log (Syslog) – to allow logging/sharing of system
events on a server.
2. Configuring for Operation (see
Section 4.3
) – Setting the parameters required
for functioning in the network application:
ƒ Configuring the physical layer parameters
ƒ Setting port protection
ƒ Defining the master and fallback clock
ƒ Configuring the logical layer (PPPoE) parameters (optional)
ƒ Configuring the application parameters, which include DSL, ATM, bridge,
router interface, remote peers (including static routes if necessary), MPLS
and multiservice over PSN parameters.
Figure 4-1. Configuring the Unit for Operation
3. Additional Tasks (see
Section 4.4
) – Displaying the inventory, resetting the
unit and managing the file system.