Ace ACE-3105, Инструкция по установке и эксплуатации

Страница: 22 / 418

Quick Start Guide Installation and Operation Manual
4 Starting and Configuring ACE-3105, ACE-3205 ACE-3105, ACE-3205 Ver. 5.2
• Multiservice over PSN parameters (if traffic is to be carried over a
packet-switched network).
³
To configure the router functionality:
•
On the router Interface menu (Configuration> Applications> Router>
Interface), enter the required routing parameters.
³
To configure the ATM functionality:
• On the ATM menu (Configuration> Applications> ATM), select the ATM
functionality type and then set the parameters in the relevant submenu.
³
To configure the bridge functionality:
•
On the Bridge menu (Configuration> Applications> Bridge), enter the required
bridge parameters.
³
To configure the MPLS functionality:
• On the MPLS menu (Configuration> Applications> MPLS), enter the MPLS
dynamic range and then set the parameters in the relevant submenu.
³
To configure the multiservice over PSN functionality:
•
On the Multiservice over PSN menu (Configuration> Applications>
Multiservice over PSN), select the PSN functionality type and then set the
parameters in the relevant submenu.
Setting the Clock Source
Set the source from which ACE-3105, ACE-3205 should derive its timing.
³
To set the clock source:
• On the Clock menu (Configuration> System> Clock), select the type of source
and then set the clock parameters in the relevant submenu.
Defining the Manager IP
³
To define the manager IP address:
•
On the Manager List menu (Configuration> System> Management>
Manager List), set the IP and trap mask parameters (per manager).