manualshive.com logo in svg

ABB TPU2000, Техническое руководство, Страница: 46 / 374

Поделиться
Скачать
ABB TPU2000 Скачать руководство пользователя страница 46

TPU2000/2000R Modbus/Modbus Plus/ Modbus TCP/IP Automation Guide

 

36

 

• 

ENABLE SNTP – If this box is checked, SNTP is enabled and the fields illustrated in Figure 4-15 
are enabled for configuration. 

• 

SNTP Address – The SNTP host address is entered in this field.  The field is available for 
configuration if the ENABLE SNTP box is checked and the TPU 2000R hardware is selected. 

• 

SNTP Request -  Two Radio Buttons are available for selection of SNTP update type.  The 
selections are: 

o 

LISTEN – The TPU 2000R listens to the host and receives the time synchronization as 
the host sends it. 

o 

PERIOD: Seconds-  The TPU 2000R requests Time Synchronization from the SNTP 
Host at specific time intervals.  The time interval is specified in seconds. 

• 

SNTP TIMEOUT – This value is defined in milliseconds in which the synchronized time packet 
must be received by the host server.  If the time is not received in this time period, the TPU 
internal clock is not synchronized. 

• 

UTC OFFSET HOURS: This value is enters in hours (/-XX.X) and is used to offset the 
received UTC time so that local time can be displayed   

If the TPU only supports serial time synchronization via IRIG B, then only the selections listed in Table 4-5 will be 
available for configuration. 

 

TIME SYNCHRONIZATION 
MEHTOD 

WINECP TIME 
SYNCH  VALUE 

SNTP 
BOX 

DESCRIPTION 

NONE DISABLE 

Not 
Applicable 

Internal TPU Clock Not 
Synchronized with External 
Source. 

IRIG B 

ENABLE –cc 
Or 
ENABLE- mmm 

Unchecked Internal TPU Clock Synchronized 

with External IRIG  B signal. 
  MMM – Reported in Milliseconds 
from Midnight with most significant 
bit set. 
CC- Reported in Deciseconds 

Simple Network Time Protocol  ENABLE –cc 

Or 
ENABLE- mmm 

Checked 

Internal TPU Clock Synchronized 
with External IRIG  B signal. 
MMM – Reported in Milliseconds 
from Midnight with most significant 
bit set. 
CC- Reported in Deciseconds 

IRIG B 

Enable mmm for MMI 
and COM. 

 

Time synchronization reported in 
format of hours, minutes, seconds, 
milliseconds. 

TABLE 4-5 : TIME SYNCHRONIZATION OPTIONS AND CONFIGURATION VALUES 

 

Example: 

 

The following (IRIGB mmm) time is received from the TPU2000R:

 

 
 

 

         82C6F096, where hour contains 82, minute contains C6 etc.

 

 

This would represent the following time in hours minutes seconds milliseconds in 
milliseconds from midnight: 

 
 

 

           12:56:13:150 

 
 

 

Содержание TPU2000























































































































































































































































































































































































Отзывы:

Нет отзывов