ABB i-bus KNX Room Master Premium RM/S 2.1, Руководство по эксплуатации продукта

Страница: 71 / 276

ABB i-bus
®
KNX
Commissioning
© 2008 ABB STOTZ-KONTAKT GmbH 69
3.2.4.1.1 Parameter window
A: Output
- Time
In this parameter window all settings for the
Function time
are undertaken:
Staircase lighting
and
switching ON and OFF delay
.
Note
The outputs A-D do not feature a
Flashing
function.
For flashing function refer to: Parameter window E: Output – Time, Flashing , page 85
This parameter window is visible if in parameter window
A: Output
(20 A/16 AX C-Load)
, page 63, the parameter
Enable function time
has been
enabled.
Explanations concerning the time functions and the timing sequences can be
found at
Planning and application
, page 208. Please also note the
Function
chart
, page 215, originates from the switch and sequence priorities.
Function time
Options: Staircase lighting
switching ON and OFF delay
This parameter defines the type of
Time
function for each output.
•
Staircase lighting:
The value with which the staircase lighting is switched
on and off can be parameterised. The staircase lighting time
commences at switch on. It is switched off immediately after the
staircase lighting time has been completed.
•
switching ON and OFF delay: The output can be switched on or off with
a delay via this function.
Note
The function
Staircase lighting
can be recalled via the communication
object
Switch
,
Logical connection x
(x = 1, 2) or recalled with a light scene
recall.