ABB i-bus KNX Room Master Premium RM/S 2.1, Руководство по эксплуатации продукта

Страница: 67 / 276

ABB i-bus
®
KNX
Commissioning
© 2008 ABB STOTZ-KONTAKT GmbH 65
Enable function time
Options: no
yes
•
no:
The parameter window remains disabled and invisible.
•
yes:
The parameter window -
Time
appears.
After the function
Time
has been enabled the parameter window
- Time
is
enabled. Further settings can be made here, e.g. on and off delays with
staircase lighting.
Note
A more exact description of the function can be found in chapter
Communication objects output A
, page 196, No. 136.
Enable function scene
Options: no
yes
•
no:
The parameter window remains disabled and invisible.
•
yes:
The parameter window -
Scene
appears.
After the function
Scene
has been enabled the parameter window
- Scene
is
enabled. Here you can undertake further settings, e.g. allocation of the
output to a scene or standard value.
Enable function logic
Options: no
yes
•
no:
The parameter window remains disabled and invisible.
•
yes:
The parameter window -
Logic
appears.
After the function
Connection/Logic
has been enabled the parameter window
- Time
is enabled. Here further settings can be undertaken, e.g. connection
and linking of the connection.
Enable function forced operation
Options: no
yes
This parameter enables forced operation.
A forced operation communication object is available for every output.
The forced operation (a 1 bit or 2 bit communication object per output) sets
the output in a defined state – where as long as the forced operation is
active – it can only be changed via the forced operation communication
object.
The switch state after the end of forced operation can be set using the
parameter
Contact position with end of the forced operation
.
•
yes:
Other parameters appear: