manualshive.com logo in svg

ZyXEL Communications ZyWall USG20-VPN, User Manual

Share
Download
ZyXEL Communications ZyWall USG20-VPN User Manual Download Page 80

Chapter 4 Quick Setup Wizards

USG20(W)-VPN Series User’s Guide

80

•

My Address (interface)

: Select one of the interfaces from the pull down menu to apply the 

L2TP VPN rule.

•

Pre-Shared Key

: Type the password. Both ends of the VPN tunnel must use the same password. 

Use 8 to 31 case-sensitive ASCII characters or 8 to 31 pairs of hexadecimal (“0-9”, “A-F”) 
characters. Proceed a hexadecimal key with “0x”. You will receive a PYLD_MALFORMED (payload 
malformed) packet if the same pre-shared key is not used on both ends.

Click 

Next

 to continue the wizard.

4.5.2  L2TP VPN Settings

Figure 68   

VPN Settings for L2TP VPN Settings Wizard:  L2TP VPN Settings

•

IP Address Pool

: Select Range or Subnet from the pull down menu. This IP address pool is used 

to assign to the L2TP VPN clients.

•

Starting IP Address

: Enter the starting IP address in the field.

•

End IP Address

: Enter the ending IP address in the field.

•

First DNS Server (Optional)

: Enter the first DNS server IP address in the field. Leave the filed 

as 0.0.0.0 if you do not want to configure DNS servers. If you do not configure a DNS server you 
must know the IP address of a machine in order to access it.

•

Second DNS Server (Optional)

:Enter the second DNS server IP address in the field. Leave the 

filed as 0.0.0.0 if you do not want to configure DNS servers. If you do not configure a DNS server 
you must know the IP address of a machine in order to access it.

•

Allow L2TP traffic Through WAN

: Select this check box to allow traffic from L2TP clients to go 

to the Internet.  

Click 

Next

 to continue the wizard.

Summary of Contents for ZyWall USG20-VPN












































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands