ZyXEL Communications ZyWall USG20-VPN User Manual Download Page 471

Page: 471 / 683

Chapter 29 Object

USG20(W)-VPN Series User’s Guide

471

Note: You can have a maximum of 32 radio profiles on the USG.

Figure 318

Configuration > Object > AP Profile > Radio

The following table describes the labels in this screen.

Table 189

Configuration > Object > AP Profile > Radio

LABEL

DESCRIPTION

Add

Click this to add a new radio profile.

Edit

Click this to edit the selected radio profile.

Remove

Click this to remove the selected radio profile.

Activate

To turn on an entry, select it and click

Activate

Inactivate

To turn off an entry, select it and click

Inactivate

Object Reference Click this to view which other objects are linked to the selected radio profile.

This field is a sequential value, and it is not associated with a specific profile.

Status

This icon is lit when the entry is active and dimmed when the entry is inactive.

Profile Name

This field indicates the name assigned to the radio profile.

Frequency Band

This field indicates the frequency band which this radio profile is configured to use.

Channel ID

This field indicates the broadcast channel which this radio profile is configured to use.

Apply

Click

Apply

to save your changes back to the USG.

Reset

Click

Reset

to return the screen to its last-saved settings.

Summary of Contents for ZyWall USG20-VPN












































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZyWall USG20-VPN

Reviews:

Brands by name

Popular brands

ZyXEL Communications ZyWall USG20-VPN, User Manual

Search results

Summary of Contents for ZyWall USG20-VPN

Reviews:

Brands by name

Popular brands