manualshive.com logo in svg

ZyXEL Communications ZyWall USG20-VPN, User Manual

Share
Download
ZyXEL Communications ZyWall USG20-VPN User Manual Download Page 159

 Chapter 9 Interfaces

USG20(W)-VPN Series User’s Guide

159

  Suffix

  Address

Enter the ending part of the IPv6 address, a slash (/), and the prefix length. The USG 
will append it to the delegated prefix.

For example, you got a delegated prefix of 2003:1234:5678/48. You want to configure 
an IP address of 2003:1234:5678:1111::1/128 for this interface, then enter 
::1111:0:0:0:1/128 in this field.

  Address

This field displays the combined IPv6 IP address for this interface.

Note: This field displays the combined address after you click 

OK

 and reopen this 

screen.

DHCPv6 Setting

DUID

This field displays the DHCP Unique IDentifier (DUID) of the interface, which is unique 
and used for identification purposes when the interface is exchanging DHCPv6 
messages with others. See 

DHCPv6 on page 146

 for more information.

DUID as MAC

Select this if you want the DUID is generated from the interface’s default MAC address.

Customized 

DUID

If you want to use a customized DUID, enter it here for the interface.

Enable Rapid 

Commit

Select this to shorten the DHCPv6 message exchange process from four to two steps. 
This function helps reduce heavy network traffic load.

Note: Make sure you also enable this option in the DHCPv6 clients to make rapid commit 

work.

Information 

Refresh Time

Enter the number of seconds a DHCPv6 client should wait before refreshing information 
retrieved from DHCPv6.

Request Address This field is available if you set this interface to DHCPv6 

Client

. Select this to get an 

IPv6 IP address for this interface from the DHCP server. Clear this to not get any IP 
address information through DHCPv6.

DHCPv6 Request 

Options / 

DHCPv6 Lease 

Options

If this interface is a DHCPv6 client, use this section to configure DHCPv6 request 
settings that determine what additional information to get from the DHCPv6 server. If 
the interface is a DHCPv6 server, use this section to configure DHCPv6 lease settings 
that determine what additional information to offer to the DHCPv6 clients.

  Add

Click this to create an entry in this table. See 

Section 9.3.3 on page 165

 for more 

information.

  Remove

Select an entry and click this to delete it from this table.

  Object

  Reference

Select an entry and click 

Object Reference

 to open a screen that shows which 

settings use the entry. See 

Section 9.3.2 on page 164

 for an example.

  #

This field is a sequential value, and it is not associated with any entry.

  Name

This field displays the name of the DHCPv6 request or lease object.

  Type

This field displays the type of the object.

  Value

This field displays the IPv6 prefix that the USG obtained from an uplink router (

Server

 

is selected) or will advertise to its clients (

Client

 is selected).

Interface

When 

Relay

 is selected, select this check box and an interface from the drop-down list 

if you want to use it as the relay server.

Relay Server

When 

Relay

 is selected, select this check box and enter the IP address of a DHCPv6 

server as the relay server.

IPv6 Router 
Advertisement 
Setting

Enable Router 

Advertisement

Select this to enable this interface to send router advertisement messages periodically. 
See 

IPv6 Router Advertisement on page 146

 for more information.

Table 64   

Configuration > Network > Interface > Ethernet > Edit (continued)

LABEL

DESCRIPTION

Summary of Contents for ZyWall USG20-VPN












































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands