ZyXEL Communications P-320W v3, User Manual

Page: 98 / 262

Chapter 9 Network Address Translation (NAT)
P-320W v3 User’s Guide
98
9.5.1 Rule Setup Screen
To edit a port forwarding rule, click the edit icon under Modify. The following
screen displays.
Figure 63 NAT: Port Forwarding: Rule Setup
The following table describes the labels in this screen.
Modify Click the Edit icon to display and modify an existing rule setting in the
fields under Add Application Rule .
Click the Remove icon to delete a rule.
Apply Click Apply to save your changes to the Application Rules Summary
table.
Reset Click Reset to not save and return your new changes in the Service
Name and Port fields to the previous one.
Table 40 NAT Application (continued)
LABEL DESCRIPTION
Table 41 Network > NAT > General
LABEL DESCRIPTION
Active Select the check box to enable this port forwarding entry.
Clear the checkbox to disallow forwarding of these ports to an inside
server without having to delete the entry.
Service Name Type a Service Name to identify this port-forwarding rule.
Start Port Type a start port number. To forward only one port, enter it again in the
End Port field. To specify a range of ports, enter the last port to be
forwarded in the End Port field.
End Port Type an end port number.
Server IP
Address Type the inside IP address of the server.
Apply Click Apply to save your changes back to the P-320W v3.
Reset Click Reset to begin configuring this screen afresh.