ZyXEL Communications P-320W v3 User Manual Download

Page: 185 / 262

P-320W v3 User’s Guide

185

H A P T E R

2 0

Troubleshooting

This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.

•

Power, Hardware Connections, and LEDs

•

P-320W v3 Access and Login

•

Internet Access

•

Resetting the P-320W v3 to Its Factory Defaults

•

Wireless Router Troubleshooting

•

Advanced Features

20.1 Power, Hardware Connections, and LEDs

The P-320W v3 does not turn on. None of the LEDs turn on.

Make sure you are using the power adaptor or cord included with the P-320W v3.

Make sure the power adaptor or cord is connected to the P-320W v3 and plugged
in to an appropriate power source. Make sure the power source is turned on.

Disconnect and re-connect the power adaptor or cord to the P-320W v3.

If the problem continues, contact the vendor.

One of the LEDs does not behave as expected.

Make sure you understand the normal behavior of the LED. See

Section 1.4 on

page 23

Summary of Contents for P-320W v3







































































































































































































































































Search results

Summary of Contents for P-320W v3

Reviews:

Related manuals for P-320W v3

Brands by name

Popular brands

ZyXEL Communications P-320W v3, User Manual

Search results

Summary of Contents for P-320W v3

Reviews:

Related manuals for P-320W v3

Brands by name

Popular brands