manualshive.com logo in svg

ZyXEL Communications P-320W v3, User Manual

Share
Download
ZyXEL Communications P-320W v3 User Manual Download Page 188

Chapter 20 Troubleshooting

P-320W v3 User’s Guide

188

1

Make sure you have entered the password correctly. The default password is 

1234

. This field is case-sensitive, so make sure [Caps Lock] is not on. 

2

You cannot log in to the web configurator while someone is using Telnet to access 
the P-320W v3. Log out of the P-320W v3 in the other session, or ask the person 
who is logged in to log out. 

3

Disconnect and re-connect the power adaptor or cord to the P-320W v3. 

4

If this does not work, you have to reset the device to its factory defaults. See 

Section 20.4 on page 189

.

20.3  Internet Access

I cannot access the Internet.

1

Check the hardware connections, and make sure the LEDs are behaving as 
expected. See the Quick Start Guide.

2

Make sure you entered your ISP account information correctly in the wizard. These 
fields are case-sensitive, so make sure [Caps Lock] is not on.

3

If you are trying to access the Internet wirelessly, make sure the wireless settings 
in the wireless client are the same as the settings in the AP.

4

Disconnect all the cables from your device, and follow the directions in the Quick 
Start Guide again. 

5

If the problem continues, contact your ISP.

I cannot access the Internet anymore. I had access to the Internet (with the P-
320W v3), but my Internet connection is not available anymore.

1

Check the hardware connections, and make sure the LEDs are behaving as 
expected. See the Quick Start Guide and 

Section 1.4 on page 23

.

2

Reboot the P-320W v3.

3

If the problem continues, contact your ISP. 

Summary of Contents for P-320W v3







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands