ZyXEL Communications P-320W v3 Page 34 User Manual Download

Page: 34 / 262

Chapter 2 Introducing the Web Configurator

P-320W v3 User’s Guide

The following table describes the labels in this screen.

2.4.5 Summary: Active Session

Click the

Active Session (Details...)

hyperlink in the

Status

screen. View a list

of devices that are currently associated to the P-320W v3 and read-only
information such as internal/external IP addresses and Time-out.

Figure 12

Summary: Active Session

The following table describes the labels in this screen.

Table 7

Summary: Statistics

LABEL

DESCRIPTION

Port

This is the P-320W v3’s port type.

TxPkts

This is the number of transmitted packets on this port.

RxPkts

This is the number of received packets on this port.

System Up Time

This is the total time the P-320W v3 has been on.

Poll Interval(s)

Enter the time interval for refreshing statistics in this field.

Set Interval

Click this button to apply the new poll interval you entered in the

Poll

Interval(s)

field.

Stop

Click

Stop

to stop refreshing statistics.

Table 8

Summary: Active Sessiont

LABEL

DESCRIPTION

This is the index number of the active session.

Internal

This is the internal IP address of the device.

Protocol

This is the transfer protocol used.

External

This is the external IP address of the device.

NAT

This is the numerical tag for the NAT entry.

Time out

This is the time out value (in minutes) of the NAT entry.

Summary of Contents for P-320W v3







































































































































































































































































Search results

Summary of Contents for P-320W v3

Reviews:

Related manuals for P-320W v3

Brands by name

Popular brands

ZyXEL Communications P-320W v3, User Manual

Search results

Summary of Contents for P-320W v3

Reviews:

Related manuals for P-320W v3

Brands by name

Popular brands