ZyXEL Communications P-320W v3 User Manual Download

Page: 165 / 262

Chapter 18 Logs

P-320W v3 User’s Guide

165

18.5 Log Settings Screen

Use this screen to configure to where the P-320W v3 is to send logs and which
logs and/or immediate alerts the P-320W v3 to send.

Click

Maintenance

Logs

Log Settings

to open the

Log Settings

screen.

Figure 103

Maintenance > Logs > Log Settings

The following table describes the labels in this screen.

Table 63

Maintenance > Logs > Log Settings

LABEL

DESCRIPTION

E-mail Log Settings

Active

Click

Active

to enable the log feature.

Mail Server

Enter the server name or the IP address of the mail server for the e-
mail addresses specified below. If this field is left blank, logs and alert
messages will not be sent via E-mail.

Mail Subject

Type a title that you want to be in the subject line of the log e-mail
message that the P-320W v3 sends. Not all P-320W v3 models have
this field.

Summary of Contents for P-320W v3







































































































































































































































































Search results

Summary of Contents for P-320W v3

Reviews:

Related manuals for P-320W v3

Brands by name

Popular brands

ZyXEL Communications P-320W v3, User Manual

Search results

Summary of Contents for P-320W v3

Reviews:

Related manuals for P-320W v3

Brands by name

Popular brands