manualshive.com logo in svg

ZyXEL Communications P-320W v3, User Manual

Share
Download
ZyXEL Communications P-320W v3 User Manual Download Page 195

 Chapter 21 Product Specifications

P-320W v3 User’s Guide

195

Content Filter

The P-320W v3 blocks or allows access to web sites that you 
specify and blocks access to web sites with URLs that contain 
keywords that you specify. You can define time periods and 
days during which content filtering is enabled. You can also 
include or exclude particular computers on your network from 
content filtering.

You can also subscribe to category-based content filtering that 
allows your P-320W v3 to check web sites against an external 
database.

Time and Date

Get the current time and date from an external server when 
you turn on your P-320W v3. You can also set the time 
manually. These dates and times are then used in logs.

Port Forwarding

If you have a server (mail or web server for example) on your 
network, then use this feature to let people access it from the 
Internet.

DHCP (Dynamic Host 
Configuration Protocol)

Use this feature to have the P-320W v3 assign IP addresses, an 
IP default gateway and DNS servers to computers on your 
network.

Dynamic DNS Support

With Dynamic DNS (Domain Name System) support, you can 
use a fixed URL, www.zyxel.com for example, with a dynamic 
IP address. You must register for this service with a Dynamic 
DNS service provider.

Logging

Use logs for troubleshooting. 

PPPoE

PPPoE mimics a dial-up over Ethernet Internet access 
connection.

PPTP Encapsulation

Point-to-Point Tunneling Protocol (PPTP) enables secure 
transfer of data through a Virtual Private Network (VPN). The 
P-320W v3 supports one PPTP connection at a time.

Universal Plug and Play 
(UPnP)

The P-320W v3 can communicate with other UPnP enabled 
devices in a network. 

Table 84   

Firmware Features

FEATURE

DESCRIPTION

Summary of Contents for P-320W v3







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands