IES-2000/3000 User’s Guide
25-6
Firmware and Configuration File Maintenance
Figure 25-6 Successful Backup Confirmation Screen
25.3 Restore Configuration
This section shows you how to restore a previously saved configuration. Note that this function erases the current
configuration before restoring a previous back up configuration; please do not attempt to restore unless you have a
backup configuration file stored on disk.
FTP is the preferred method for restoring your current computer configuration to your VLC1012 since FTP is
faster. Please note that you must wait for the system to automatically restart after the file transfer is complete.
WARNING!
DO NOT INTERRUPT THE FILE TRANSFER PROCESS AS THIS MAY PERMANENTLY DAMAGE
YOUR VLC1012. WHEN THE RESTORE CONFIGURATION PROCESS IS COMPLETE, THE VLC1012
WILL AUTOMATICALLY RESTART.
25.3.1
Restore Using FTP or TFTP
For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file upload in this chapter.
Figure 25-7 Telnet into Menu 24.6
FTP Restore Procedure
Step 1.
Launch the FTP client on your computer.
Step 2.
Enter “open”, followed by a space and the IP address of your VLC1012.
Step 3.
Press
[ENTER]
when prompted for a username.
** Backup Configuration completed. OK.
### Hit any key to continue.###
Menu 24.6 -- System Maintenance — Restore Configuration
To transfer the firmware and configuration file to your workstation, follow the
procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your router. Then type "root" and
SMT password as requested.
3. Type "put backupfilename rom-0" where backupfilename is the name of
your backup configuration file on your workstation and rom-spt is the
remote file name on the router. This restores the configuration to
your router.
4. The system reboots automatically after a successful file transfer
For details on FTP commands, please consult the documentation of your FTP
client program. For details on backup using TFTP (note that you must remain
in this menu to back up using TFTP), please see your router manual.
Press ENTER to Exit:
Summary of Contents for IES-2000
