ZyXEL Communications IES-2000, User Manual

Page: 101 / 304

IES-2000/3000 User’s Guide
ALC1024 Specific Commands 7-13
The
show port
command shows the line status (up or down), the actual upstream/downstream rates and mode of
an individual ADSL port.
7.5.20 Show Ports Command
Syntax:
192.168.1.1 adsl> show ports
The
show ports
command shows the line status (up or down), the actual upstream/downstream rates and the
mode of all ADSL ports.
7.5.21 Set PVC Command
Syntax:
192.168.1.1 adsl> set pvc <port number> <multiplexing mode> <tx vpi> <tx vci>
[<rx vpi> <rx vci>]
where
<port number>
=
A port number, from 1 to 24.
<multiplexing mode>
=
Either
llc
or
vc.
<tx vpi>
=
The VPI setting of the ADSL port for use with a TX based network.
<tx vci>
=
The VCI setting for the ADSL port for use with a TX based network.
<rx vpi>
=
The VPI setting for the ADSL port for use with Rx based networks.
<rx vci>
=
The VCI setting for the ADSL port for use with Rx based networks.
The
set pvc
command allows the configuration of a PVC (permanent virtual circuit) for an individual ADSL
port.
The
<rx vpi>
and
<rx vci>
settings will be equal to those of
<tx vpi>
and
<tx vci>
if the
rx .settings are not configured.
7.5.22 Set PVCs Command
Syntax:
192.168.1.1 adsl> set pvcs <multiplexing mode> <tx vpi> <tx vci> [<rx vpi> <rx
vci>]
where
<multiplexing mode>
=
either “
llc
” or “
vc
”
<tx vpi>
=
The VPI setting of the ADSL port for use with a TX based network.
<tx vci>
=
The VCI setting for the ADSL port for use with a TX based network.