ZyXEL Communications IES-2000, User Manual

Page: 117 / 304

IES-2000/3000 User’s Guide
Bridge Commands 10-3
10.4.2 MAC Filter Enable Command
Syntax:
192.168.1.1 bridge> macfilter enable [<port>]
where
<port> = A bridge port number.
This command enables the MAC filtering feature on a specific port or on all ports if no port number is
specified.
10.4.3 MAC Filter Disable Command
Syntax:
192.168.1.1 bridge> macfilter disable [<port>]
where
<port> = A bridge port number.
This command disables the MAC filtering feature on a specific port or on all ports if no port number is
specified.
10.4.4 MAC Filter Add Command
Syntax:
192.168.1.1 bridge> macfilter add <port> <mac>
where
<port> =
A bridge port number.
<mac> =
The source MAC address in "00:a0:c5:12:34:56" format.
This command adds a source MAC address fixed on a specified port. You may add up to five MAC addresses.
10.4.5 MAC Filter Delete Command
Syntax:
192.168.1.1 bridge> macfilter delete <port> <mac>
where
<port> = A bridge port number.
<mac> = The source MAC address in hexadecimal format, for example "00:a0:c5:12:34:56".
This command removes a configured source MAC address from a port specified by you.