ZyXEL Communications IES-2000, User Manual

Page: 99 / 304

IES-2000/3000 User’s Guide
ALC1024 Specific Commands 7-11
192.168.1.1 adsl> show profile debug
#Entry type : adslLineConfProfileEntry
ConfProfileName : debug
AtucConfTargetSnrMgn : 6 db
AtucConfMaxSnrMgn : 31 db
AtucConfMinSnrMgn : 0 db
AtucChanConfInterleaveMinTxRate : 32 Kbps
AtucChanConfInterleaveMaxTxRate : 8000 Kbps
AturConfTargetSnrMgn : 6 db
AturConfMaxSnrMgn : 31 db
AturConfMinSnrMgn : 0 db
AturChanConfInterleaveMinTxRate : 32 Kbps
AturChanConfInterleaveMaxTxRate : 800 Kbps
ConfProfileRowStatus : active(1)
This display shows that the maximum upstream transmission rate is set to 800 kbps and the maximum
downstream transmission rate is set to 8000 kbps. The
ConfProfileRowStatus
displays
active
; this
means that the profile is available for use. It does not mean that the profile has been applied to any of the ports.
Please refer to the
set port
command for information on assigning profiles to ports or the
list profiles
command for information on how to list the profiles
7.5.16 Show Profiles Command
Syntax:
192.168.1.1 adsl> show profiles
The
show profiles
command displays the settings of all the ADSL profiles.
7.5.17 Set Port Command
Syntax:
192.168.1.1 adsl> set port <port number> <profile name> <oper mode>
where
<port number>
=
A port number ranging from 1 to 24.
<profile name>
= The profile that will define the settings of this port.
<oper mode>
= Operational mode. Choose from
glite
,
gdmt
,
t1413
or
auto
for Annex A. Choose from
anxb
or
auto
for Annex B.