ZyXEL Communications IES-2000, User Manual

Page: 213 / 304

IES-2000/3000 User’s Guide
System Maintenance 1 24-7
Table 24-3 Menu 24.1.2 - Spanning Tree Protocol Status
FIELD DESCRIPTION
Max Age This is the maximum time (in seconds) a device can wait without receiving a
configuration message before attempting to reconfigure.
Forward Delay This is the time (in seconds) a device will wait before changing states.
Topology The next two fields detail STP topology change information.
Change Times This is the number of times the spanning tree has been reconfigured.
Time Since Last
Change
This is the time since the spanning tree was last reconfigured.
24.2.3 VLAN Status
Verify VLAN status in this menu when you have set the VLAN Type field to 802.1Q in Menu 2 – Switch Setup .
Step 7.
Enter 24 from the main menu to go to Menu 24 – System Maintenance .
Step 8.
Enter 1 to open Menu 24.1 – System Status .
Step 9.
Enter 2 to open Menu 24.1.3 — VLAN Status .
Figure 24-6 Menu 24.1.3 VLAN Status
Table 24-4 Menu 24.1.3 - VLAN Status
FIELD DESCRIPTION
Number of VLANs This is the total number of VLANs on the switch.
Management VID Management VLAN ID is the VLAN ID of the CPU and is used for management only. The
default is "1". All ports, by default, are fixed members (see
Menu 17.1.1 - 802.1Q VLAN Static
Entry Setup ) of this "management VLAN" so as to manage the device from any port.
VID This is the VLAN identification number configured in menu 17.1.1)
Egress Port These are the VLAN member ports. “E” denotes an egress port. The “|” symbol separates
every five ports.
Untagged Port These are the ports that transmit untagged (“U”) egress frames (in this VLAN).
Elapsed Time This field displays the elapsed time since this VLAN was created.
Status This field displays whether the VLAN is created dynamically using GVRP or static.
Menu 24.1.3 - VLAN Status
Number of VLANs= 1 Management VID= 1
VID Egress Port Untagged Port Elapsed Time Status
----- ---------------- ---------------- ------------ -------
1 EEEEE|EEEEE|EEEE UUUUU|UUUUU|UUUU 4:15:11 Static
Press ESC to return,'p' for prev OR 'n' for next page: