ZyXEL Communications IES-2000, User Manual

Page: 198 / 304

IES-2000/3000 User’s Guide
22-2 VLAN Setup
Table 22-1 Menu 17 - VLAN Setup
FIELD DESCRIPTION EXAMPLE
GVRP GVRP (GARP VLAN Registration Protocol) is a registration protocol that
defines a way for switches to register necessary VLAN members on ports
across the network. Enable this function to permit VLANs groups beyond the
local switch. Press [SPACE BAR] once to select
Enable and then [ENTER]
to permit GVRP on this port.
Enable
Management
VLAN ID Management VLAN ID is the VLAN ID of the CPU and is used for
management only. The default is "1". All ports, by default, are fixed members
(see
Menu 17.1.1 - 802.1Q VLAN Static Entry Setup ) of this "management
VLAN" in order to manage the device from any port. If a port (VDSL or
Ethernet) is not a member of this VLAN, then users on that port cannot
access the device. To access the device make sure the port that you
connected to is a member of Management VLAN.
1 (default)
Edit 802.1Q
VLAN Static
Entry Press [SPACE BAR] once to select Yes and then [ENTER] to open Menu
17.1 - 802.1Q VLAN Static Entry Setup to edit static VLANs.
No
Once you have completed filling in Menu 6.1.3 – Port VLAN Setup, press [ENTER] at the message “Press
ENTER to Confirm…“ to save your configuration or press [ESC] at any time to cancel.
22.2.1 Static VLAN Setup
Go to the Edit 802.1Q VLAN Static Entry field in Menu 17 — VLAN Setup and select Yes to open Menu
17.1 — 802.1Q VLAN Static Entry . Menu 17.1 shows all defined static VLANs.
Enter the index of the static entry you wish to configure to open Menu 17.1.1 - 802.1Q VLAN Static Entry
Setup . Menu 17.1.1 allows you configure a static entry.
Figure 22-3 Menu 17.1.1 - 802.1Q VLAN Static Entry Setup
Table 22-2 Menu 17.1.1 - VLAN Static Entry Setup
FIELD DESCRIPTION
Name Enter a descriptive name (up to 12 characters) for the static VLAN for identification
purposes; for example, “marketing” (without the quotes).
VLAN ID Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
Menu 17.1.1 - 802.1Q VLAN Static Entry Setup
Name= PVID-1
VLAN ID= 1
Active= Yes
Port01= Fixed-U Port06= Fixed-U Port11= Fixed-U
Port02= Fixed-U Port07= Fixed-U Port12= Fixed-U
Port03= Fixed-U Port08= Fixed-U Port13= Fixed-U
Port04= Fixed-U Port09= Fixed-U Port14= Fixed-U
Port05= Fixed-U Port10= Fixed-U
Trunk1= N/A
Press ENTER to Confirm or ESC to Cancel: