IES-2000/3000 User’s Guide
20-4
Port Setup
Table 20-2 Menu 6.2 – Ethernet Port Setup
FIELD DESCRIPTION
EXAMPLE
Edit Spanning
Tree Protocol
Setup
Press [SPACE BAR] once to select
Yes
and then press [ENTER] to go to
Menu 6.1 - Port Spanning Tree Protocol Setup.
You must enable STP
on the switch (in menu 2) before you configure it on a port(s).
No
Edit VLAN Setup Press [SPACE BAR] once to select
Yes
and then press [ENTER]
to open
Menu 6.1.3 — Port VLAN Setup
.
No
Default Port
Priority
The
Default Port Priority
value is added to incoming frames without a
(802.1p) priority tag. The default is
0
. Use this field to define the default
priority of each port.
100
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your
configuration, or press [ESC] at any time to cancel.
20.3 Configuring STP on a Port
You must enable STP on the switch (in menu 2) before you configure it on a port(s).
Enter 6 from the main menu and then choose a port to configure by entering its index number. Go to the
Edit
Spanning Tree Protocol Setup
field, press
[SPACE BAR]
once to select
Yes
and then
[ENTER]
to go to
Menu
6.1.1 - Port Spanning Tree Protocol Setup
.
Figure 20-4 Menu 6.1.1 - Port Spanning Tree Protocol Setup
Table 20-3 Menu 6.1.1 - Port Spanning Tree Protocol Setup
FIELD
DESCRIPTION
EXAMPLE
Spanning Tree
Protocol:
Configure the next three fields to use STP on this port. Make sure that STP is
enabled on the device (see menu 2).
Active Press [SPACE BAR] once to select
Yes
to enable the Spanning Tree
Protocol.
No
Priority Configure the priority for each port here. Priority decides which port should be
disabled when more than one port form a loop in a switch. Ports with a higher
numeric priority value are disabled first. The allowed range is between 0 and
255 and the default value is 128.
128 (default)
Path Cost Path cost is the cost of transmitting a frame onto a LAN through that port. It is
assigned according to the speed of the media. The slower the media, the
higher the cost.
Menu 6.1.1 - Port Spanning Tree Protocol Setup
Spanning Tree Protocol:
Active= No
Priority= 128
Path Cost= 100
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Summary of Contents for IES-2000
