ZyXEL Communications IES-2000, User Manual

Page: 221 / 304

IES-2000/3000 User’s Guide
Firmware and Configuration File Maintenance 25-3
earlier in this chapter for more information on filename conventions.
Step 7.
Enter “quit” to exit the ftp prompt.
25.2.3 Example of FTP Commands from the Command Line
Figure 25-2 FTP Session Example
25.2.4 GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-based FTP clients.
Table 25-2 General Commands for GUI-based FTP Clients
COMMAND DESCRIPTION
Host Address Enter the address of the host server.
Login Type Anonymous.
This is when a user I.D. and password is automatically supplied to the
server for anonymous access. Anonymous logins will work only if your ISP
or service administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer Type Transfer files in either ASCII (plain text format) or in binary mode.
Initial Remote Directory Specify the default remote directory (path).
Initial Local Directory Specify the default local directory (path).
25.2.5 TFTP and FTP over WAN Restrictions
TFTP and FTP over WAN will not work when:
•
FTP service is disabled in menu 24.11.
•
The IP address(es) in the Secured Client Sets menu (menu 24.11.1) does not match the client IP address. If it
does not match, the VLC1012 will disconnect the FTP session immediately.
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 zyxel.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds
297.89Kbytes/sec.
ftp> quit