PAGE 1
Ins-40085-US Net2Air Ethernet bridge - UL
01/28/2013
The access control unit connects to the Net2 software running on the PC using Paxton Net2Air proprietary wireless
technology. A Net2Air bridge enables communication from the Net2 software to the Paxton wireless products.
Radio signals do not always behave as you might expect. For example, a cell phone that displays a full signal on
one part of the site will lose signal completely only a few feet away. These problems can be addressed by using the
Net2 site surveyor kit (690-200-US)
See also:
X
AN1095 - Net2 nano - How does it work? <
http://paxton.info/974 >
X
AN1096 - How to plan a Net2 nano installation <
http://paxton.info/975 >
X
Ins-30096-US - Net2Air site surveyor <
http://paxton.info/1193 >
Net2Air wireless communication
Reader
Control unit
Net2Air Ethernet bridge
This unit is for supplemental use only, and is to be employed as a programming/downloading/monitoring tool only.
The unit will continue to operate in a 'standalone' mode if the PC is shut down. Any Events that occur during this
period are stored in the unit and the PC is updated when it comes back on line.
Part number
Description
477-384-US
Net2Air Ethernet bridge
Options
Paxton
LETTER SIZE
Radio frequency
This product should not be installed within 10 feet of other wireless equipment operating on a 2.4Ghz frequency.
To ensure optimum performance other wireless networks should avoid WiFi channels 11, 12 and 13 to reduce the
possibility of interference.
**IMPORTANT - THIS IS A NETWORK DEVICE**
Please contact your IT Administrator before installing this product.
Technical Support
Technical help is available: Monday - Friday from 02:00 AM - 8:00 PM (EST)
1.800.672.7298
Documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/
For instructions in alternative languages - http://paxton.info/1000
