![background image](http://html1.mh-extra.com/html/yuchai/yc135/yc135_operation-and-maintenance-manual_3663100094.webp)
94
8.9 HOW TO ESCAPE FROM MUD
Always operate carefully to avoid getting stuck in mud. if the machine does
get stuck in mud, use the following procedures to get the machine out.
When only one side in stuck:
Use the bucket to raise the track, then lay
boards or logs and drive the machine out.
If necessary, put a board under the bucket
also.
S
OLLEVAMENTO DELLA MACCHINA
Quando usate il braccio e l’asta per sollevare la macchina,
assicuratevi che la parte della benna a contatto con il
terreno non sia la parte iniziale (denti). Verificate, inoltre,
che l’angolo fra il braccio e l’asta sia compreso tra 90° e
110°.
When both side are stuck:
If the machine will not move, lay boards as
explained above and dig the bucket into
the ground in front. Then pull in the arm
as in normal digging operations and put
the travel levers in the forward position to
pull the machine out.
Summary of Contents for YC135
