107
12.2 LOAD PRECAUTION
After machine load, on a truck, keep it still as written below:
1. Lover down the blade.
2. Extend the bucket and arm cylinders completely, then lower down the
arm slowly.
3. Stop the engine and remove the start key.
4. Put the safety lock lever in lock position.
5. Insert a big beam under the
bucket cylinder, to avoid the
contact with the floor.
6. Place rectangular timber underneath
the front and rear track shoes to
prevent the machine from moving about.
Also, hold it down with chains or ropes.
Be particularly careful to ensure that the
machine does not slip sideways.
12.3 PRECAUTION FOR TRANSPORTATION
P
RECAUTION FOR TRANSPORTATION
•
Obey all state and local laws governing the weight, width
and length of a load. Observe all regulations governing
wide loads.
•
Always check if the door is lock in one position: open or
closed.
•
Always remember to retract the car radio antenna.
Summary of Contents for YC135
