113
15. STARTING MACHINE WITH JUMP-START CABLES
(BATTERY DISCHARGED!)
O
PERATING WITH
B
ATTERY
•
Before operating battery, stop the engine and turn the
starting key to the 0 position.
•
When handling battery, always wear protective gloves
and eyeglass.
•
When removing the battery, first disconnect the cable
from the ground and remember which is which.
•
When installing the battery, first connect the positive
cable. Be careful because the sudden contact between
positive pole and frame will cause sparks.
O
PERATING WITH
B
ATTERY
•
Battery electrolyte is dilute by sulphuric acid, it will
attack skin and clothes. If sulphuric acid drop on your
clothes immediately take them off and clean the skin
with a large quantity of cold water. If sulphuric acid drop
on your skin immediately clean the skin with a large
quantity of cold water and call for medical emergency.
•
If the terminal are loose there is danger that the
detective contact may generate sparks that will cause an
explosion. When installing the terminals, install them
tightly.
Summary of Contents for YC135
