37
3.3 TRANSPORT
PRECAUTION
LOAD AND UNLOAD
•
Load and unload the machine into trucks may cause injure. Due to this
you
ALWAYS MUST PAY ATTENTION
.
•
During load or unload operation, put the engine at low idle then operate
slowly with travelling levers.
•
Load and/or unload the machine always on firm, level surface. Keep
clearance from road edge.
•
ALWAYS
lock the trucks’ tires with wood stoppers and put some strong
piece of wood under the ramps (see the follow design).
•
ALWAYS
use loading ramps of adequate strength and size. Maintain the
slope of loading ramps within 15°.
•
Be sure that the ramps are been secured on the truck’s bed.
•
Keep the truck bed and ramps clean of oil, clay, ice, snow and other
materials which can become slippery.
•
NEVER
correct you travelling on the ramps: the machine can tip over. If it
necessary come back and restart the manoeuvre.
•
Do not move cabin or arm on the trailer it may cause lose of stability.
•
After machine load lock the crawler then fasten the machine with suitable
belt.
CORRECT
Ram
Lock
Lock
Ramp distance
Max 15°
Summary of Contents for YC135
