76
7.2 STARTING
7.2.1. Precaution
1. Verify the safety lock lever is in lock position.
2. Verify that all levers are in neutral position.
3. Check warning lamps in this way: rotate the
start key in
position, so the buzzer ring, the
lamp Contact insert, battery charge and engine
oil pressure flashes.
4. Adjust the operator’s seat to reach lever and
pedal correctly. Operator backside must be
leant against the backrest. Fast the seat belt.
S
TARTING PRECAUTION
Verify that nobody were in the working zone, play horn
then start the machine.
7.2.2. Engine
starting
1. Rotate the key in start position
. The engine will start.
S
TARTER
Do not run the starter more then 10 seconds. In engine
does not start rotate the key in OFF position, wait for 30
seconds then try to start the engine again. After a false
start do not rotate the key until the engine is still. (the
starter may damage).
2. When the engine start, release the key, it came back in work position
I
.
Unlock
Lock
Summary of Contents for YC135
