![background image](http://html1.mh-extra.com/html/yuchai/yc135/yc135_operation-and-maintenance-manual_3663100028.webp)
28
BEFORE GO TO THE REVERSE MOTION OR SWING, BE SURE THAT
NOBODY IS AROUND THE WORKING ZONE
•
In dangerous zone o where there is incomplete view, put always a signal.
•
Make sure that nobody is inside the radius swing or rear the machine.
•
Before start motion, play the horn to warn people standing or walking
around the machine.
•
There are blind spots to the rear of the machine, so swing the cab around
before backing up to check that the area is safe and clear.
MOTION PRECAUTION
•
Travel with the dozer blade folded as shown on the diagram and the
bucket raised 40 ÷ 50 cm. from the ground.
•
Do not slew (swing) while travelling. If you must operate the hoe
attachment while travelling, operate at speeds slow enough so you have
complete control at all times.
•
On uneven ground, travel at low speed and avoid accelerating, stopping
or changing directions abruptly.
•
Avoid crossing over obstacles whenever possible. If you must do so,
keep the hoe attachment close to the ground and travel slowly. Never
cross obstacles if they will seriously tilt the machine (to an angle of 10° or
greater).
Summary of Contents for YC135
