65
(29) WINDOW WIPER SWITCH
When the key is in ON position, this switch control the window wiper on the
front cabin’s window. (It is not present for canopy setting).
NOTICE:
Do not turn ON the window wiper when the window is dry,
otherwise the rubber will be damaged.
(2) START KEY
OFF Position (0):
In this set the machine is totally OFF, so you can
remove the key from the socket.
Run Position:
In
a
position the current may through in the line
and the buzzer ring.
ON Position (I):
After starting, the key came back in I position;
meanwhile the engine is running, leave the key in ON position.
Preheating position (HEAT):
Before start the engine, specially in winter, put the key in
position so the
preheating lamp (21) will flash. Leave the key in this position until the lamp
turn off, then start the engine.
Start Position:
To start the engine move the key in
position. While staring the engine
keep the key in this position, when the engine run suddenly release the key,
which came back in
I
position.
Summary of Contents for YC135
