![background image](http://html1.mh-extra.com/html/yuchai/yc135/yc135_operation-and-maintenance-manual_3663100106.webp)
106
To load or unload the machine, use always ramps or a platform and follows
these rules:
1. Properly apply the brakes on the trailer and insert blocks beneath the
tires to ensure that it does not move.
2. Fix ramps in line with the centres of the trailer and the machine. Be sure
that the two sides are at the same level as one another.
3. Make the angle of the gangplank a maximum of 15°. Set the distance
between the ramps to match the centre of the tracks.
4. Lower the engine speed using the throttle lever.
5. Set the swing lock lever to the lock position.
6. set in direction of the ramps, lower the work equipment as far as
possible without letting it hit the trailer, then travel slowly to load or
unload the machine.
If the work equipment is installed to the machine, load from the front; if the
work equipment is not installed then load from the rear.
NOTICE:
when you are on the ramps do not operate any lever than the
travel one.
7. Load the machine correctly in the specified position on the trailer.
CORRECT
Ramp
Block
Blocks
Distance between ramps
Max 15°
Summary of Contents for YC135
