![background image](http://html1.mh-extra.com/html/yuchai/yc135/yc135_operation-and-maintenance-manual_3663100073.webp)
73
7.1.4. Fuel level and refuelling
R
EFUELLING
When refuelling do not drain it off the tank, it may cause a
fire. If some gasoline drain off dry it immediately with a
duster.
1. Insert the key in the socket the move it in ON position.
2. Check the fuel level in the fuel gauge. If the indicator bars are in red zone
you must refuel the machine.
3. Unlock the top with the key and rotate the top
in anti clockwise to open the tank.
4. Put some diesel inside, then fast the top tightly
and close it with the key.
7.1.5. Check hydraulic oil and refill
R
EPLACING HYDRAULIC OIL
•
When remove the hydraulic oil top, unscrew it slowly, in
order to reduce the pressure inside the tank.
•
If to much oil is filled in, stop the engine wait for cooling
down then drain the excess oil.
1. Park the machine on a level ground.
2. Lower down the bucket, start the engine and leave
it run at low idle for some minutes, then lower the
blade and contract the arm and buck after this
lower the boom until the bucket teeth touch the
ground.
3. Leave the engine run for 5 minutes then stop it.
Summary of Contents for YC135
