![background image](http://html1.mh-extra.com/html/yuchai/yc135/yc135_operation-and-maintenance-manual_3663100148.webp)
148
Decrease the tension:
G
REASE UNDER PRESSURE
Remove the grease from the strain crawl cylinder only as
shown in procedure below.
1. Open the top (1) then loosen the lubricator (2) gradually on the strain crawl
cylinder to realise the grease.
2. Turn the lubricator a maximum of one turn.
3. If the grease does not come out smoothly, move the machine backwards
and forwards.
4. Tighten the lubricator.
5. Travel the machine backwards and forwards to check if the track tension
has been achieved.
Summary of Contents for YC135
