62
(14) ENGINE OIL PRESSURE GAUGE
This gauge indicates the engine pressure. It works only with the start key in
ON position. Under normal condition, when the engine run, le gauge bars
must be in green zone. When the gauge bars are in red zone the engine oil
has low level, lower then the minimum pressure allowed (0.2 MPa): stop the
engine immediately.
(15) ENGINE OIL PRESSURE LAMP
It flash when the engine oil pressure is low. Suddenly stop the
engine. Check the engine and the oil level. Under normal
condition this lamp must be off.
NOTICE:
Cold oil, low level or travel in heavy slope may cause
lamp flash.
(16) COOLANT TEMPERATURE WARNING LAMP
This lamp flash in case of abnormal coolant malfunctioning.
Under normal functioning with the engine turn on it must be off.
The lamp flash if the engine temperature raise too much, so turn
off the engine and wait for cool down.
Carry out the checks listed in the trouble shooting table.
(17) HYDRAULIC OIL TEMPERATURE WARNING LAMP
This lamp flash in case of abnormal hydraulic oil temperature.
Under normal functioning with the engine turn on it must be off.
The lamp flash if the hydraulic temperature raise too much, so
turn off the engine and wait for cool down.
Carry out the checks listed in the trouble shooting table.
(18) GLOW LAMP
This lamp flash when the engine is in the preheating mode, alias
when the start key is in HEAT mode, and turns off when the
preheating is completed.
Summary of Contents for YC135
