140
If the lug wear and the steel cord inside the shoe
is exposed for two links or more, replace with a
new part.
If more the half of the steel cord layer on one side
is cut, replace with a new part.
If the rubber core has separated at one place or
more, replace with a new part.
Rubber shoe tension:
If the rubber shoes is still slack even when grease is pumped in, replace with
a new part or replace the seal inside the cylinder.
When you want to know if your rubber shoes must be replaced, repaired or
you can use them again please contact
YUCHAI ENGINEERING
MACHINERY CO. LTD.
If cracks between the rubber shoe lugs increase to a size of approax. 60 mm
the rubber shoes must be repaired. Even if the track is small and short, if the
steel cord can be seen inside, carry out repairs immediately.
Steel cord expoesd
Core
separation
Summary of Contents for YC135
