39
STARTING WITH ASSISTANCE CABLES
•
When starting the machine with assistance cables wear
ALWAYS
safety
glass.
•
When use assistance cables connected to another vehicle avoid contact
with both machines.
•
When connect two batteries with assistance cables first connect the
positive ones (+). When disconnect the batteries first remove the negative
cable (–).
•
If positive cable (+) and frame become in contact sparks will be
generated. It is dangerous so pay attention in your work.
•
When you two batteries to help starting make sure to connect the positive
cable from one battery to the positive cable from the other ones.
•
When connect the negative cable to the machine’s frame make sure that
it is the most far as it possible to the battery.
3.5 PULLING
PRECAUTION
WHEN PULL THE MACHINE CONNECT THE CABLE ON THE FRAME
•
If your machine will be pulled use
ALWAYS
a steel rope or cable with
enough pull capability.
•
NEVER
pull a non-working machine on a slope.
•
Do not use a steel rope twisted or worn.
•
Do not ride on the rope or cable.
•
When connect a truck and the machine do not allow nobody to cross or
stay between two vehicle.
•
Set the truck, the ropes and the machine in same line.
•
Put a piece of wood between the ropes and the contact point to protect
the machine from wearing o damaging.
Summary of Contents for YC135
