![background image](http://html1.mh-extra.com/html/yuchai/yc135/yc135_operation-and-maintenance-manual_3663100147.webp)
147
Tension adjusting:
G
REASE UNDER PRESSURE
Grease inside the adjusting mechanism is under high
pressure, if it coming out from lubricator point can penetrate
or hit your body causing injury or death. For this reason:
•
•
do not loosen lubricator (1) more then one turn,
•
do not loosen any other part than lubricator.
If the tension is different from what is specified above, do as follow:
Increasing the tension:
1. Prepare a grease gun, remove the lubricator top (1), pump in grease
through lubricator hole (2).
2. Travel the machine backwards and forwards to check if the track tension
has been achieved.
3. Go on with grease pumping until S
become 0 mm. If the tension is too low,
then the pin and the bearing are too
worn, so replace them. Please contact
YUCHAI ENGINEERING MACHINERY
CO. LTD.
to purchase the new parts.
Summary of Contents for YC135
