![background image](http://html1.mh-extra.com/html/yuchai/yc135/yc135_operation-and-maintenance-manual_3663100138.webp)
138
19.1.2. Check, Clean and Replace air filter
A
IR FILTER CLEANING
•
Do not clean or replace air filter while engine is running.
•
If use compressed air to clean air filter always use
protective eyeglasses.
Clean and check:
Upper advanced filter
1. Go up the hood, on the machine rear,
unscrew the top and remove the advanced
filter.
2. Take out the filtering element then use a clean cloth duster to close the air
tube to prevent dust entering. Clean the external pan.
3. Clean the filtering element (5). To do this
blow compressed dried air (less then 700
kPa, 7 kg/cm
2
, 7 bar) starting from internal
element alongside the holes, the blow the air
outside the element along the creases.
NOTICE:
When you clean the element, do not hit or beat it with anything.
Replace the element that has cleaned 4 times or which has been used for
400 h. Replace the elements if you find out small holes or spoiled part. Do
not use an element which has creases, holes or gaskets damaged.
4. Remove the cloth used like top at point 2.
5. Put the cleaned element inside the case then close the top with his clip.
Summary of Contents for YC135
