178
P
RECAUTION INSTALL AND UNINSTALL THE ACCESSORIES
•
Before install and uninstall accessories park the
machine on level, solid ground.
•
If two or more operators will install or uninstall
accessories first define who give orders and who receive
orders.
•
If you must move heavy objects use crane with enough
loading capacity.
•
Clamp on a crane the heavy objects before uninstall
them.
•
When clamp on a crane the heavy objects be careful to
them centre of gravity.
•
NEVER walk under lifted loads. Stand always in a
“safety” position far from falling point.
•
It is dangerous operate with lifted loads. Always check
the correct clamping then put objects in balanced and
safety position before leave work area.
•
When install or uninstall accessories, be sure they are in
balance position to prevent drop over.
P
RECAUTION FOR WORKING OPERATION WITH
ACCESSORIES
If heavy equipment is installed, the overrun of the swing
become greater, that is the distance from the point where
the operator operates the control levels to stop the swing
to the point where the upper structure stop completely, so
there is danger of mistaking the distance and hitting
something.
•
If long work equipment is installed, the working range
will suddenly become larger, so there is danger of
mistaking the distance and hitting something.
•
Always keep enough clearance between the work
equipment and any objects standing in the working area.
Summary of Contents for YC135
