90
P
ERMISSIBLE WATER DEPTH
Do not immerse the machine in water by more then the
permissible depth (under centre of carrier roller (1)).
Also, for parts that have been immersed in water for long
time, pump in grease until the old grease comes out from
the bearings (around the bucket pins).
P
RECAUTIONS WHEN TRAVELLING UP OR DOWN HILLS
•
When travelling, raise the bucket approx. 20 ÷ 30 cm
from the ground.
•
If the machine slide down or loss stability, lower down
the bucket and brake the machine.
P
RECAUTIONS WHEN TRAVELLING UP OR DOWN HILLS
•
Do not travelling downhill in reverse.
•
IT IS DANGEROUS to turns on slopes or to travel across
slopes. Always go down to a flat place to perform these
operations.
•
Turning or operating the work equipment when working
on slopes may cause the machine to lose its balance
and turn over, so avoid such operations. It is particularly
dangerous to swing downhill when the bucket is loaded.
If such operations have to be carried out, pile soil to
make platform on the slope so that the machine can be
kept horizontal when operating.
•
Do not travel on slopes of over 25° as there is danger
that the machine may overturn.
CORRECT
Summary of Contents for YC135
