YOKOGAWA TA320 User Manual Download Page 99

Page: 99 / 144

9-13

IM 704210-01E

Saving and Loading the Data from a Floppy Disk

9.7 Deleting Saved Data

P r o c e d u r e

• To exit from the current menu, press any of the top menu keys or press the ESC touch key

displayed on the screen.

UTILITY Top Menu

MODE

FUNCTION

DISPLAY

SAMPLE

INPUT

UTILITY

Selects the UTILITY menu.

Displays the file menu.

Insert a formatted floppy disk into the floppy disk drive.

Press the UTILITY key to display the UTILITY top menu.

Press the NEXT touch key to display NEXT 2/3 on the key.

Selecting the item to be deleted

Press the FILE touch key to display the file menu.

Turn the rotary knob to highlight the desired item on the ITEM touch key. The highlighted

item to be deleted will be selected.

Selecting the name of the file to be deleted

Press the SAVE/LOAD touch key to display the save/load menu.

Turn the rotary knob to highlight the file to be deleted.

Press the DELETE SET touch key. An asterisk “ * ” will be displayed on the left of the

selected file name, indicating the file to be deleted has been selected. Pressing the DELETE

SET touch key again causes the asterisk to disappear, indicating that selection of the file has

been canceled.

Performing deletion

After the file to be deleted has been selected, press the DELETE EXEC touch key to delete

the file.

File menu

Displays the
save/load menu.

Selects the item
to be deleted.

Performs deletion.

Selects the file
to be deleted.

Save/load menu

Asterisk

Summary of Contents for TA320

















































































































































Search results

Summary of Contents for TA320

Reviews:

Related manuals for TA320

Brands by name

Popular brands

YOKOGAWA TA320, User Manual

Search results

Summary of Contents for TA320

Reviews:

Related manuals for TA320

Brands by name

Popular brands