7-18
IM 704210-01E
Jumping to the top data
6.
Press the TOP touch key. “1” will be displayed on the NUMBER touch key. In the case of
time stamp mode, the first measured value of the measurement block will be displayed at the
top of the list.
In the case of hardware histogram mode, the smallest value (representative value) inside the
window will be displayed at the top of the list.
Jumping to the bottom data
7.
Press the BOTTOM touch key. In the case of time stamp mode, the last measured value of
the measurement block will be displayed at the bottom of the list. The value displayed on the
NUMBER touch key indicates the data number of the last measured value.
In the case of hardware histogram mode, the largest value (class value) inside the window
will be displayed at the bottom of the list. The value displayed on the NUMBER touch key
indicates the data number of the largest value (class value).
Explanation
Selecting the list display function.
The list contains 10 data items. The contents of the list vary according to the selected sampling
mode. The time stamp resolution is 100 ns.
• Time stamp mode
Time stamp Measured value
The data number of the
highlighted data is displayed.
Data number
1
2
3
4
5
6
7
8
9
10
• Hardware histogram mode
Class value
Frequency
The data number of the
highlighted data is displayed.
Data number
74
75
76
77
78
79
80
81
82
83
Setting range for data number
The setting range varies according to the selected according to the selected sampling mode.
• Time stamp mode: From the first measured value (NUMBER 1) to the last measured value of a
measurement block.
• Hardware histogram mode: From the smallest measured value (class value) (NUMBER 1) to
the largest value (class value) within the window
Note
The cursor is located at data number 1 during measurement. It is not possible to set data number during
measurement.
7.6 Selecting the List Display Function and Displaying the Data
