2-1
IM 704210-01E
Name and Use of Each Part
2
2.1 Front Panel
100ps resolution 14MS/s
TIME INTERVAL ANALYZER
MODE
FUNCTION
DISPLAY
SAMPLE
INPUT
UTILITY
POWER
SINGLE
START STOP
KEY
BOARD
COPY
LOCAL
REMOTE
CH
A
CH
B
50 5Vrms
1M 40Vpk
Top menu keys
Displays the corresponding top menu.
• MODE key
Displays the sampling mode selection screen. (See 5.1.)
• FUNCTION key
Displays menus for setting/selecting the measurement function, input channel and slope. (See chapter 5.)
• DISPLAY key
Displays menus for setting/selecting the display format, window axis, markers, calculation. (See chapter 7.)
• SAMPLE key
Displays menus for setting/selecting the gate, sample size, sampling interval, arming and inhibit. (See chapters 6.2, 6.3 and 6.4.)
• INPUT key
Displays menus for setting/selecting the input coupling, input impedance, trigger mode and trigger level. (See chapter 6.1.)
• UTILITY key
Displays menus for setting/selecting initialization of set-up information, storing and recalling of data in the internal memory,
configuration (communication, contrast, date/time, touch key sound), self-test, saving and loading of data from a floppy disk, reference
clock, calibration and initialization of a floppy disk. Also displays the error logging window and version No. (ROM version). (See 3.7,
chapters 8,9, and 10, and 11.3 to 11.5.)
LCD display
(Touch screen)
Rotary knob
Sets a numerical value, moves markers and
selects a file. (See 4.2, chapters 7 and 9.)
Arrow keys
Moves from one digit to
another digit during setting
of a numerical value. Also
used as a back space key
(<). (See 4.2.)
SINGLE key
Carries out measurement
only once. (See 4.1.)
START/STOP key
Starts/stops continuous
measurement. (See 4.1.)
LOCAL key
Cancels remote control
(REMOTE indicator lights
up during remote control
mode). Refer to the GP-IB
Interface User’s Manual
(IM704210-12E).
COPY key
Saves the screen image data
to a floppy disk/outputs the
screen image data to an
external plotter.
(See 9.6 and 10.1.)
KEYBOARD key
Displays a ten-key (only
when a ten-key icon is
displayed on the left of a
touch key).(See 4.2.)
Measurement indicator
Lights up during acquisition
of measured data.
CHA/CHB input indicator
Blinks while the signal is input and a trigger
is caused.
CHA/CHB input terminal
Connect the input signal cables to these terminals.
(See 3.5.)
Eject button
Used to remove the
floppy disk.(See 9.1.)
Floppy disk drive
Access indicator
Blinks while the floppy
disk drive is in use.
Power switch
(See 3.4.)
Touch key
Press the area enclosed
by to make various
settings and selections.
