manualshive.com logo in svg

YOKOGAWA TA320, User Manual

Share
Download
YOKOGAWA TA320 User Manual Download Page 58

6-5

IM 704210-01E

Setting the Acquisition Conditions for Input Signal to be Measured

6

Selecting the polarity

Select the desired polarity from the following.  This setting is available only when EXTERNAL

gate is selected.

•

 :

Carries out measurement only when a positive signal is being input to the EXT ARM

IN terminal.

•

 :

Carries out measurement only when a negative signal is being input to the EXT ARM

IN terminal.

Note

Measurement of one block will be forced to end when the maximum number of events for the selected

sampling mode is reached or when the maximum sampling time is exceeded, even if the external gate is

still open.

Selecting the sampling interval

Select the desired sampling interval from the following.  For hardware histogram mode, the

sampling interval is fixed at MIN and cannot be set to another option.

MIN/1 

µ

s/2 

µ

s/4 

µ

s/10 

µ

s/20 

µ

s/40 

µ

s/100 

µ

s/200 

µ

s/400 

µ

s/1 ms/2 ms/4 ms

MIN equals to 71 ns.

Selected sampling interval

Currently set number of events

6.2 Setting the Gate Type, Sample Size and Sampling Interval

Summary of Contents for TA320

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands