YOKOGAWA TA320 User Manual Download Page 83

Page: 83 / 144

7-21

IM 704210-01E

Displaying the Measured/Computed Data

7.8 Selecting the Histogram Display Function and

Displaying the Statistic Data

≡

For a description of the function, refer to 1.4 and 1.6

≡

P r o c e d u r e

• To exit from the current menu, press any of the top menu keys or press the ESC touch key

displayed on the screen.

DISPLAY Top Menu

MODE

FUNCTION

DISPLAY

SAMPLE

INPUT

UTILITY

(Displayed for hardware histogram mode only.)

Displays the statistical computation item menu.

Displays the display format menu.

Press the DISPLAY key to display the DISPLAY top menu.

Selecting the statistics display function

Select the statistics display function as described in 7.1.

Selecting the statistical computation items

Press the STAT touch key located at the bottom of the screen to display the statistical

computation item menu.

Press the touch keys corresponding to the desired items. The selected items will be displayed

on the right of the STAT touch key. Only two items can be selected at a time. If the STAT

touch key is pressed again to select other items, the previously selected and displayed two

items will be replaced by newly selected items.

Turning OFF display of the selected items

Press the OFF touch menu of the statistical computation item menu. The currently displayed

two items will disappear.

Returning to the DISPLAY top menu

Press the STAT touch key again or press the EXIT touch key to return to the DISPLAY top

menu.

Statistical computation items menu

Returns to the DISPLAY top menu.

Turns OFF display of the selected items.

Selects the statistical computation items.

Summary of Contents for TA320

















































































































































Search results

Summary of Contents for TA320

Reviews:

Related manuals for TA320

Brands by name

Popular brands

YOKOGAWA TA320, User Manual

Search results

Summary of Contents for TA320

Reviews:

Related manuals for TA320

Brands by name

Popular brands