YOKOGAWA TA320 User Manual Download Page 48

Page: 48 / 144

5-6

IM 704210-01E

5.4 Setting Pulse Width Measurement

≡

For a description of the function, refer to 1.3

≡

P r o c e d u r e

• To exit from the current menu, press any of the top menu keys or press the ESC touch key

displayed on the screen.

FUNCTION Top Menu

MODE

FUNCTION

DISPLAY

SAMPLE

INPUT

UTILITY

Displays the measurement function menu.

Selects the channel to be used for measurement.

Selects a polarity.

Press the FUNCTION key to display the FUNCTION top menu.

Selecting pulse width measurement

Press the FUNC touch key to display the measurement function menu.

Press the PULSEWIDTH touch key to select pulse width measurement. The screen will

return to the FUNCTION top menu when the PULSEWIDTH touch key is pressed.

Selecting the channel to be

used for measurement

Press the CHA/CHB touch key to select the desired channel (CHA or CHB). The

highlighted channel (CHA or CHB) will be selected.

Selecting the polarity

Press the POLARITY touch key to highlight POLARITY.

Turn the rotary knob to select the desired polarity.

Measurement function menu

Selects pulse width measurement.

These keys are displayed for time stamp mode only.

Summary of Contents for TA320

















































































































































Search results

Summary of Contents for TA320

Reviews:

Related manuals for TA320

Brands by name

Popular brands

YOKOGAWA TA320, User Manual

Search results

Summary of Contents for TA320

Reviews:

Related manuals for TA320

Brands by name

Popular brands