manualshive.com logo in svg

YOKOGAWA TA320, User Manual

Share
Download
YOKOGAWA TA320 User Manual Download Page 89

9-3

IM 704210-01E

Saving and Loading the Data from a Floppy Disk

9

Explanation

Displaying the free space available on the floppy disk

If the floppy disk menu is displayed with a MS-DOS formatted floppy disk inserted into the

floppy disk unit, the free space available on the floppy disk will be displayed.

Selecting the format type

Select the desired format type from the following.

• 640K2DD: Used to format a 2DD type floppy disk for 640 KB/8 sectors.

• 720K2DD: Used to format a 2DD type floppy disk for 720 KB/9 sectors.

• 1.2M2HD: Used to format a 2HD type floppy disk for 1.2 MB/8 sectors.

• 1.44M2HD: Used to format a 2HD type floppy disk for 1.44 MB/18 sectors.

Creating directories during formatting

The following directories will be created on the floppy disk automatically when the floppy disk is

formatted.

• TA_WAVE: Directory for measured binary data (BIN)

• TA_SETUP: Directory for set-up information

• TA_TEXT: Directory for measured text data (TEXT)

• TA_MISC: Directory for screen image data including set-up information (IMAGE)/statistical

computation text data (STAT)

Note

• Floppy disks formatted in a format type other than those specified above cannot be used with this

instrument.

• If an error message is displayed after formatting, the floppy disk may be faulty.

• All the data stored on the floppy disk will be deleted when the floppy disk is formatted.

CAUTION

Never remove the floppy disk while the access indicator is blinking.  Failure to do so

may damage the magnetic head of the floppy disk drive or destroy the data saved on the

floppy disk.

9.2 Formatting a Floppy Disk

Summary of Contents for TA320

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands