YOKOGAWA TA320 User Manual Download Page 65

Page: 65 / 144

7-3

IM 704210-01E

Displaying the Measured/Computed Data

Explanation

Selecting the histogram display function

From the display format menu, select HISTOGRAM.

Performing auto scaling

The X-axis and Y-axis will be set automatically so that the entire distribution of measured data

can be displayed.

The X-axis and Y-axis scaling can be changed as described below.

Setting the X-axis and Y-axis

• Setting range for center value of X-axis.

The setting range varies according to the selected measurement function.

• Period, time interval or pulse width measurement: 10 ns to 99.9999900 ms (up to 3.19

s in

the case of hardware histogram mode)

• Phase difference measurement:

15.00 to 345.00 deg

• Duty ratio measurement:

0.500 to 99.500%

• Selecting the span of X-axis

The span varies according to the selected measurement function.

• Period, time interval or pulse width measurement: 2/4/10/20/40/100/200/400 ns, 1/2/4/10/20/

40/100/200/400

s, 1/2/4/10/20/40/100 ms (up to 3.2

s in the case of hardware histogram

mode)

• Phase difference measurement: 30/60/90/180/360 deg

• Duty ratio measurement: 1/5/10/50/100%

• Selecting the Y-axis scale.

• LIN: Linear scale

• LOG: Logarithmic scale

• Selecting the maximum value of Y-axis

The maximum value of Y-axis varies according to the selected Y-axis scale.

• LIN: 10/20/40/100/200/400/1000/2000/4000/10000/20000/40000/1e5/1e6/1e7/1e8 (up to

32000 in the case of time stamp mode)

• LOG: 1e1/1e2/1e3/1e4/1e5/1e6/1e7/1e8 (e.g. 1e2 indicates 10

.) (up to 1e5 in the case of time

stamp mode)

7.1 Setting the Histogram Display Function and Reading the Data (Readout)

Summary of Contents for TA320

















































































































































Search results

Summary of Contents for TA320

Reviews:

Brands by name

Popular brands

YOKOGAWA TA320, User Manual

Search results

Summary of Contents for TA320

Reviews:

Brands by name

Popular brands