YOKOGAWA TA320 User Manual Download Page 103

Page: 103 / 144

10-3

IM 704210-01E

Using Other Functions

Explanation

Connecting the plotter

• Applicable plotters

HP-GL compatible plotters (i.e. plotters which support the HP-GL commands) can be used with

this instrument. Drawable range may differ depending on the plotter model, causing incomplete

plotting.

HP-GL compatible plotter (by YOKOGAWA): PL600 high-speed color plotter (model: 700983)

• Connecting the plotter

Check that the power to both plotter and this instrument is OFF.

Connect the plotter to the instrument using the GP-IB cable. Tighten the screws to secure the

connector firmly.

GP-IB connector

GP-IB cable

• Setting the communication parameters

• This instrument: When the EXEC touch key is pressed to send the screen image data to the

plotter, the instrument will be switched to talk-only mode automatically. It is not possible to

switch the instrument to talk-only mode using front panel keys.

• Plotter: Switch the plotter to listen-only mode.

Note

• Outputting to the plotter is not possible during measurement.

• For a description of the GP-IB interface, refer to the GP-IB Interface User’s Manual (IM704210-12E),

Selecting the paper size

The following paper sizes are available. Select the desired paper size.

Selected Paper Size

Output Size

Output Position

Center

A5 Upper

Upper half (A4)

A5 Lower

Lower half (A4)

For details, refer to 9.5.

10.1 Outputting Data to a Plotter

Summary of Contents for TA320

















































































































































Search results

Summary of Contents for TA320

Reviews:

Related manuals for TA320

Brands by name

Popular brands

YOKOGAWA TA320, User Manual

Search results

Summary of Contents for TA320

Reviews:

Related manuals for TA320

Brands by name

Popular brands